Around the web · SOTS Blog

Easier Gearing on Older Three Speeds

One frequently discussed problem with vintage three speeds is high gearing. Raleigh et al usually mounted 18 tooth cogs on their rear hubs, which often makes going uphill a chore. The best way to lower the gearing (and make hill climbing easier) is to swap that small cog with a larger one. Nola Wilken of Restoring Vintage Bicycles from the Hand Built Era recounts her experience of doing so on her 1950 Raleigh Sports Tourist:


2 thoughts on “Easier Gearing on Older Three Speeds

  1. I agree that Sturmey Archer 3 speed hubs are geared very high. There is also the caveat that the drive chainring has to be big enough to give a greater that 1:2 advantage so the torque being applied to the hub planetary gears wouldn’t break them. The overgearing was so bad that if 2nd was geared for good all around flat land performance you really only had a 2 speed bicycle. The 3rd gear was still a very high downhill, downwind gear. I solved all of this by violating the torque specification and mounting a smaller front sprocket and a large rear sprocket. Now 3 gear is a good all around flat land riding gear. 2nd is a good stoplight startout gear and 1st is great for going over freeway overpasses and going up hills. Haven’t broken the hub yet and have had it geared this way for years now.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.